• Facebook
  • Mini Piling contractors London
  • Archives for July 2018


    Piling Contractors in London

    Before a residential home or commercial building is constructed, contractors need to lay down a foundation for the structure first. You cannot just build a structure directly on top of dirt, sand, or any other type of soil on the ground. If you do, the weight of the structure will be too much for the smooth surface to handle. It will also cause the structure to be unstable, which increases the chances of it collapsing to the ground. There needs to be a solid surface underneath the structure to support all its weight. That is the only way to create this kind of stability, whether you’re building a two-story home or an 800-meter tall skyscraper.

    There are different types of materials that may be used for foundation, such as concrete, masonry, and wood. The material chosen depends on the size of the structure and the type of soil on the ground. In a city like London with a lot of tall buildings, pile foundations are used more than anything else. Foundation piling in London is necessary because it is the only type of foundation that goes deep enough into the ground to support bigger and taller buildings. Pile foundations consist of long columns that get stuck deep into the ground where the building is going to go. The older columns were previously made from timber but now, most new columns contain either reinforced concrete or steel.

    There is no shortage of piling contractors in London. Before you begin constructing your building in the city, you will need to research the best piling companies in London that you can find. A simple Google search for “piling London” or “piling contractors London” will give you lots of positive results. You should see a list of reputable piling companies in London and their contact information. Some search results will even show you reviews of these companies too. Just use your own best judgment and pick the one that is right for you.

    Alternatively, your building contractor may be able to refer you to a piling company or they’ll subcontract to one before they start construction. It all depends on what type of contracting arrangement you have set up for yourself. Professional building contractors will already have established relationships with piling companies in London. That way, you won’t need to find one yourself. But don’t expect this to be the case with all building contractors.

    Read more
    Rotary Bored Piling (RBA)

    What are Piles in London?

    If you’re interested in piling contractors in London you should first understand what piles London are. They are basically a long cylinder made from strong materials such as concrete that are then pushed into the ground. They work as a support for a structure to be built on top of. They are able to take much heavier loads than basic spread footing.

    There are two main kinds of piles and both have their own uses. Piling contractors in London are able to help you decide on the right pile foundation to get the job done right.

    End Bearing Piles

    The bottom of an end-bearing pile will be placed on a layer of rock or strong soil. The load from the building is transferred down to this strong layer through the pile. It essentially works as a column does. End bearing piles are installed with the bottom end of the pile resting on the surface between weak and strong layers.
    Friction Piles
    Friction piles work a little differently to their load-bearing cousins. They transfer the load from a building to the soil across the entire pile with the use of friction. It basically means that the cylindrical pile as whole transfers the force rather than just the ends.

    What are Piles Made From? – piling companies London

    Piling contractors in London generally make piles using wood, steel, and concrete.

    Wooden piles would traditionally be used for construction in areas that had weak soil. They are still used today but are mostly used to build jetties. The length of a wooden pile is limited to the length of the tree it is made from. They tend to be around 20 meters long at the most. If you want to see wooden piles in action then just look at Venice, the city which “floats” on wooden piles.

    Concrete piles will be cast beforehand by the company. They are made at ground level and then hammered into the ground as needed. Steel piles are also driven into the ground in this manner. These piles are designed to take heavy loads and save time during the construction process. That is because they are pre-cast and so aren’t made on-site. Concrete piles work best in areas with corrosive soil.

    Contact us today to learn more about piles or arrange for a free consultation about which piles would be best suited for your project.

    Read more